null
Kicker

AMPLIFIER CAR KICKER 42IQ5002 2CH Q-CLASS D

(No reviews yet) Write a Review
SKU:
713034073673
Shipping:
Calculated at Checkout
On Sale
  • AMPLIFIER CAR KICKER 42IQ5002 2CH Q-CLASS D
  • AMPLIFIER CAR KICKER 42IQ5002 2CH Q-CLASS D
  • AMPLIFIER CAR KICKER 42IQ5002 2CH Q-CLASS D
Now: $115,479
Was: $128,310

Description

IQ500.2 Q-Class Amplifier

These all-new IQ Amplifiers are best described as very complex and technically “cutting-edge,” while being remarkably easy and rewarding to use.

IQ500.2

The IQ500.2 Two Channel Amplifier brings stunning clarity to your vehicle in an attractive black aluminum chassis. A blue LED light tells you the amp is on, and ready to rock!

While the amplifier easily connects to nearly any radio in the market, its connectivity doesn’t stop there. With the optional IQI™ Bluetooth interface, your phone can replace the radio as the audio source. In addition to allowing phone voice commands as well as receiving/placing calls, it also allows wireless operation of the free TWEEQ app on your iOS and Android devices.

The IQ500.2 delivers 125 watts x 2 at 4Ω and 250 watts x 2 at 2Ω. See below for more details.

TWEEQ™ IT

All IQ amplifiers come with the revolutionary TWEEQ tuning software. Available as a free app for PC, iOS and Android, this tuning system allows you the freedom to dial in your perfect sound – without buying or installing a separate processor.

Equipped with a simple walk-through configuration process, TWEEQ includes every tool you need to craft a truly excellent sonic environment. A graphic speaker selection menu, +/- 12dB equalizer with 31-bands, adjustable 24dB crossover and time alignment is all included for every channel of the amp. Access the Advanced settings for time delay controls, phase options, a full limiter/compressor, and input mixer to make your sound stage as unique as you are.

Want to TWEEQ your system wirelessly? Simply add the IQI Intelligent Interface and control as many as four IQ amplifiers with Bluetooth®! TWEEQ™

Specifications
RMS Power [Watts]
@ 14.4V, 4Ω stereo, ≤ 1% THD+N : 125 x 2
@ 14.4V, 2Ω stereo, ≤ 1% THD+N : 250 x 2
@ 14.4V, 4Ω mono, ≤ 1% THD+N : 500 x 1
Length [in, cm]
9-7/16, 24
Height [in, cm]
2-1/16, 5.2
Width [in, cm]
7-9/16, 19.1
Frequency Response [Hz]
20 - 20k
Signal-to-Noise Ratio [dB]
>95, A-weighted, re: rated power
Input Sensitivity
Low Level: 125mV-5V
High Level: 250mV-10V
Selectable Electronic Crossover
OFF/HP/LP; Variable 40Hz–180Hz @ 24dB/Octave
KickEQ™ Bass Boost (end panel adjustable)
Variable 0–12dB @ 40Hz
"KickEQ+™ Parametric Bass Boost
(Remote Control Adjustable)"
Boost : Variable 0-18db @ 40Hz
Adjustable Center Frequency : 24Hz-80Hz
Bandwidth : .5-10
Subsonic Filter
25Hz, 24dB/octave
Remote Bass
yes
Graphical User Interface Control (each channel)
Selectable Active Crossover
Variable High Pass 10-100Hz, Variable Low Pass : 40-200Hz
Ajustable Butterworth slope : OFF, 6, 12, 18 or 24dB/Octave
Adjustable Linkwitz-Riley slope : OFF, 6 or 12dB/Octave
KickEQ™
Graphic 31 Band, 1/3 octave, + or - 12dB
Time Delay
Adjustable Delay : 0-20ms
Adjustable increments : .02ms, .1 ms and 1.0 ms
Compressor
Adjustable Attack and Release time; Adjustable 1:1 - 10:1 ratio
Adjustable Threshold, -80 - 10dB
Input Mixer
Maps signal inputs to specified speaker outputs
CEA Specifications
CEA Power
125 x 2 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts)
CEA Signal-to-Noise Ratio
-80dB CEA-2006B (ref: 1W, A-weighted)
View AllClose