null
Kicker

AMPLIFIER CAR KICKER 42IQ10001 1CH Q-CLASS MONO D

(No reviews yet) Write a Review
SKU:
56008
Shipping:
Calculated at Checkout
On Sale
  • AMPLIFIER CAR KICKER 42IQ10001 1CH Q-CLASS MONO D
  • AMPLIFIER CAR KICKER 42IQ10001 1CH Q-CLASS MONO D
  • AMPLIFIER CAR KICKER 42IQ10001 1CH Q-CLASS MONO D
Now: $201,040
Was: $223,378

Description

IQ1000.1

The IQ1000.1 Mono Amplifier is more than a simple Class D power plant. Built with an advanced power supply and world-class frequency control, the IQ stands out as the best way to hear every detail your music has to offer.

The sleek yet simple chassis of the IQ belies the sophistication hidden beneath. With an input range as small as 125mV all the way up to 10 volts, this amplifier easily works with nearly any radio – factory and aftermarket alike.

The IQ1000.1 delivers 500 watts at 4Ω and 1,000 watts at 2Ω. See below for more details.

 

Specifications
RMS Power [Watts]
@ 14.4V, 4Ω mono, ≤ 1% THD+N : 500 x 1
@ 14.4V, 2Ω mono, ≤ 1% THD+N : 1000 x 1
Length [in, cm]
9-7/16, 24
Height [in, cm]
2-1/16, 5.2
Width [in, cm]
7-9/16, 19.1
Frequency Response [Hz]
25 - 180
Signal-to-Noise Ratio [dB]
>95, A-weighted, re: rated power
Input Sensitivity
Low Level: 125mV-5V
High Level: 250mV-10V
Selectable Electronic Crossover
Variable LP 40-180Hz, 24dB/octave
KickEQ™ Bass Boost (end panel adjustable)
Variable 0–18dB @ 40Hz
"KickEQ+™ Parametric Bass Boost
(Remote Control Adjustable)"
Boost : Variable 0-18db
Adjustable Center Frequency : 24Hz-80Hz
Bandwidth : .5-10
Subsonic Filter
25Hz, 24dB/octave
Remote Bass
yes
Graphical User Interface Control (each channel)
Selectable Active Crossover
Variable High Pass 10-100Hz, Variable Low Pass : 40-200Hz
Ajustable Butterworth slope : OFF, 6, 12, 18 or 24dB/Octave
Adjustable Linkwitz-Riley slope : OFF, 6 or 12dB/Octave
KickEQ™
Graphic 31 Band, 1/3 octave, + or - 12dB
Time Delay
Adjustable Delay : 0-20ms
Adjustable increments : .02ms, .1 ms and 1.0 ms
Compressor
Adjustable Attack and Release time; Adjustable 1:1 - 10:1 ratio
Adjustable Threshold, -80 - 10dB
Input Mixer
Maps signal inputs to specified speaker outputs
CEA Specifications
CEA Power
500 x 1 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts)
CEA Signal-to-Noise Ratio
-80dB CEA-2006B (ref: 1W, A-weighted)
View AllClose