null
Faital Pro

SPEAKER FAITAL PRO 8" 8FE200-4 4ohms

(1 review) Write a Review
SKU:
0000395I200769004
Shipping:
Calculated at Checkout
On Sale
  • SPEAKER FAITAL PRO 8" 8FE200-4 4ohms
  • SPEAKER FAITAL PRO 8" 8FE200-4 4ohms
  • SPEAKER FAITAL PRO 8" 8FE200-4 4ohms
  • SPEAKER FAITAL PRO 8" 8FE200-4 4ohms
  • SPEAKER FAITAL PRO 8" 8FE200-4 4ohms
Now: $12,369
Was: $17,670

Description

8FE200{ 8" - 130 W - 95 dB - 4 Ohm }

 

 

NOMINAL SPECIFICATIONS
Nominal Diameter 200 mm (8 in)
Overall Diameter 209.2 mm (8.24 in)
Bolt Circle Diameter 196.9 mm (7.75 in)
Baffle Cutout Diameter 178 mm (7.01 in)
Depth 89 mm (3.50 in)
Flange and Gasket Thickness 8 mm (0.31 in)
Net Weight 2.2 kg (4.7 lb)
Shipping Box
(Single Carton Box)
227 x 224 x 113 mm
(8.9 x 8.8 x 4.4 in)
Shipping Weight 3 kg (6.6 lb)


TECHNICAL PARAMETERS
Nominal Impedance 4 Ohm
Minimum Impedance 3.6 Ohm
AES Power Handling (1) 130 W
Maximum Power Handling (2) 260 W
Sensitivity (1W/1m) 95 dB
Frequency Range 60÷5000 Hz
Voice Coil Diameter 37 mm (1.46 in)
Winding Material Al
Former Material Kapton
Winding Depth 11.9 mm (0.47 in)
Magnetic Gap Depth 8 mm (0.31 in)
Flux Density 1 T
Magnet Ferrite Ring
Basket Material Steel
Demodulation No
Cone Surround (3) Triple Roll
NET Air Volume filled by Loudspeaker 0.6 dm^3 (0.021 ft^3)
Spider Profile 1x constant height waves
THIELE AND SMALL PARAMETERS
Fs 80 Hz
Re 3 Ohm
Qes 0.47
Qms 8.7
Qts 0.45
Vas 15.8 dm^3 (0.56 ft^3)
Sd 209 cm^2 (32.44 in^2)
Xmax (4) 4.62 mm
Xdamage (5) 10.4 mm
Mms 15.3 g
Bl 7 N/A
Le 0.25 mH
Mmd 11.9 g
Cms 0.26 mm/N
Rms 0.9 kg/s
Eta Zero 1.67 %
EBP 170 Hz


PART NUMBER (P/N)
Faston Terminals - 4 Ohm Version 02004056



NOTES:
(1) 2 Hours Test According to AES 2-1984 Rev. 2003
(2) Maximum power is defined as 3dB greater than nominal power.
(3) Treated Polycotton
(4) Xmax= [(winding depth - magnetic gap depth)/2] + (magnetic gap depth/3)
(5) Maximum excursion before permanent damage
View AllClose

1 Review

  • 5

    Get some good bass out of it

    Posted by Hector Edwards on 25th May 2022

    I've purchased this because I missed the little thumping out of my mids. I was very much impressed by the bass coming out of these. I had to move it from its previous cause the bass was too much for my trunk. P.S. Not for voice, just bass, and you need a crossover to get the total quality of these mids. I'm running it on the CRX-203 2-WAY crossover.

View AllClose